Unpacking The Product; Tire Pressure - Joovy Bicycoo BMX 0014 Serie Guia De Inicio Rapido

EN FR ES
Please read these instructions carefully before use and keep them for future reference.
TO AVOID SERIOUS INJURY:
• Continuous adult supervision is required.
• Never use near motor vehicles.
• Never use near streets, swimming pools, hills, steps, or sloped driveways.
• Always wear shoes when using the balance bike.
• Allow only one rider.
• Minimum age of rider shall be 2 years.
• Maximum age of rider shall be 5 years.
• Maximum weight of rider shall be 66 lbs (29.94 kg).
• Rider should always wear a properly fitted helmet that complies with Federal helmet requirements (16CFR1203).
If you experience any difficulty with the assembly or use of this product, or if you have a question
regarding these instructions, please contact our Customer Service Department:
UNITED STATES - Joovy: 1-877-456-5049, Hours 8:30 am 5:00 pm Central Time.
1 Assembling and Using your Balance Bike
To ensure safe operation of your balance bike, please follow these instructions carefully.

2 Unpacking the Product

• Carefully remove all parts from the box and polybag.
• Identify the parts (front fork and wheel, body/handlebar, hexagonal screw, washer, 5mm Allen wrench, (3mm Allen wrench needs to be deleted
from Bicycoo translation on this) and documents [not shown]) with the pictures in Figures 2.1.
• Discard all packaging materials properly.
• Remove the plastic coverings from any areas of the product and discard also.
• DO NOT allow children to play with any packaging materials.
• Adult assembly is required for this product.
• Tools Required (included): 5 mm Allen wrench.
• This package contains small parts which can be choking hazards.
• Some parts may have sharp edges or sharp points.
• Keep small parts away from children during assembly.
3 Installing the Front Wheel and Handlebar
• Keep children away while assembling.
• Insert the front fork and wheel middle tube into the front steering hub of the bicycle frame so that the front fork and wheel tube extends through
the top of the front steering hub. See Figure 3.1.
NOTE: Make sure that the pointed side of the front fork and wheel support is pointed towards the rear of the bicycle. See Figure 3.2.
• Install the handlebar by inserting the two handlebar tubes into the two front fork and wheel tubes with the pointed side facing the rear. See
Figure 3.3.
• Identify the washer and place it into the hole in the center of the handlebars (indentation down). See Figure 3.4.
• Identify the hexagonal screw and screw it into the hole in the center of the handlebars with the 5mm Allen wrench. See Figure 3.5.
• Pull on the handlebars to make sure they are secure.

4 Tire Pressure

Make sure the tires are inflated to 30 PSI.
Please do not return this product to the store
CANADA - ISSI Inc.: 1-800-667-4111, Hours 8:30 am 5:00 pm Eastern Time.
Please note: Styles and colors may vary.
Make sure screw on handlebar is tightened securely.
Check and adjust tire pressure before riding.
WARNING
!
WARNING
!
WARNING
!
WARNING
!