Cisco Linksys WRT54GR Manual De Instrucciones página 4

D
Select one of the following as the Internet Connection Type:
• Automatic Configuration - DHCP: Select this setting if your ISP
provides dynamic IP addresses using DHCP .
• Static IP: Select this setting if your ISP assigns you a static IP address,
then fill out the Internet IP Address, Subnet Mask,
Gateway, and DNS fields with the information you received from your
ISP . You will need to enter at least one DNS address.
• PPPoE: Select this setting if your ISP you to use PPPoE to connect to the
internet. Then fill out the User Name and Password fields with the
information provided by your ISP . If you always want to be
connected to your ISP , select the Keep Alive setting, or select the
Connect on Demand setting if you are charged for the time that you
are connected to your ISP .
• PPTP (Europe only): Select this setting if your ISP requires you to
use PPTP to connect to the internet. Then complete the Internet IP
Address, Subnet Mask, Gateway, User Name, and Password fields with
the information provided by your ISP . If you always want to be
connected to your ISP , select the Keep Alive setting, or select the
Connect on Demand setting if you are charged for the time that you
are connected to your ISP .
• Telstra (Australia and New Zealand only): Select this setting only if you
are connecting to the internet using a HBS connection. Check with your
ISP for setup information.
4