It is recommended to descale this appliance every six months. To do so,
proceed as follows:
- Unplug the steamer, release the pressure and let it cool down fully.
- Fill up the deposit with the aid of the measuring cup and the 1 L. funnel of
lukewarm water (50 ºC approx.), adding a sachet of Taurus Decal or a solution
of 25 % vinegar mixed with
75 % water.
- Leave the product to act for approximately 30 minutes.
- Shake vigorously and empty fully. If necessary repeat this procedure.
- Never submerge the appliance in water or any other liquid or put it under
running water.
- Do not use solvents or abrasive products for cleaning.
- Clean the appliance with a damp cloth lathered with a few drops of washing
up liquid and then dry off.
Anomalies and repair
- Take the appliance to an authorised technical support service if problems
arise. Do not try to dismantle or repair without assistance, as this may be
dangerous.
For EU product versions and/or in the case that it is requested in your
country:
Ecology and recyclability of the product
- The materials of which the packaging of this appliance consists are included
in a collection, classification and recycling system. Should you wish to dispose
of them, use the appropriate public recycling bins for each type of material.
The product does not contain concentrations of substances that could be
considered harmful to the environment
This symbol means that if you want to dispose of the product after
the expiry of its life, you must deposit it in the proper hands of a
licensed waste for separate collection of Waste Electrical and
Electronic Equipment (WEEE) means.
This symbol indicates that the surface may become warm during
use.
This appliance complies with Directive 2006/95/EC on Low Voltage, Directive
2004/108/EC on Electromagnetic Compatibility, Directive 2011/65/EC on the
restrictions of the use of certain hazardous substances in electrical and electro-
nic equipment and Directive 2009/125/EC on the ecodesign requirements for
energy-related products.
Manual Rapidissimo Clean Pro.indb 14
30/01/14 12:06