Adjust The Temperature; Storage And Maintenance; Cleaning The Soleplate - Moulinex CIXI Manual De Instrucciones

1800124909 ID25XX Mouli_110x154 27/02/12 11:35 Page2
Use

Adjust the temperature

• Select the temperature (see table below) setting the thermostat facing the indicator.
L
INEN
C
OTTON
W
OOL
S
ILK
S
YNTHETIC
(Polyester, Acetate,
Acrylic, Nylon)
• The thermostat light comes on. It will go out when the soleplate is hot enough.
• Your iron heats up quickly : so begin by ironing fabrics that are ironed at low
temperatures first, then go on to those requiring a higher temperature.
• When ironing fabrics with mixed fibres, set the ironing temperature for the most
delicate fibre. For delicate fabrics we recommend testing the fabric first on an
inconspicious place eg (inside the hem).
It is normal for the indicator light to switch on and off during ironing.
If you turn down the thermostat, wait until the thermostat light comes back
on before beginning to iron again.

Storage and Maintenance

Store your iron
• Unplug the iron.
• Wait until the soleplate cools down and Wind the cord around the heel of the iron.
• Store the cold iron on its heel.
Always set your iron on its heel, in order to avoid domage or scratching to the
soleplate. Caution: placing your iron flat onto a metallic surface might domage
or scratch the soleplate.

Cleaning the soleplate

• Unplug the iron, and when the soleplate is just warm, wipe it with a soft cloth.
Never use abrasive or aggressive products.
Environment protection first!
Your appliance contains valuable materials which can be
recovered or recycled.
Leave it at a local civic waste collection point.
F
ABRIC
2
P
OSITION OF
THERMOSTAT CURSOR
MAX
•••
••
•
EN
FR
ES
PT
MS
RC
HK
AR
FA