Introduction; Main Features - Ebode VLHD38 Guia Del Usuario

 Do not cover it or place other heavy objects on top of the unit which may block
thermal ventilation. Good air circulation around the product is required.
 For energy saving, please turn off the power switch or unplug the power adapter
when the units are not in use.
 If the product does not work properly, please restart it. If the problem maintains, cut
off the power and send it to professional technicians for repair or disposal. Please do
not open or repair it yourself.
 This product has been manufactured and tested to comply with each country's safety
regulations. However, it doesn't guarantee that interference would never happen in
some specific environment. If interference does occur, please take away the
interfering objects from transmitter and receiver.
 The optimal working distance between transmitter and receiver is 1 meter to 30
meters.
1.9 Cleaning
Unplug power adaptor before performing any cleaning. To clean the device, wipe with a
soft, dry cloth or with a cloth moistened with alcohol.
 Do not demount the device when connected to power outlet, otherwise, electricity
shock may happen.
 Maintenance should be conducted by an authorized technician.
 Dripping or splashing on the device is strictly prohibited.
 Keep the device away from fire or any source of heat.
 Don't let kids play with this device.
2.

Introduction

Forget pulling wires! Long Range Wireless HDMI has arrived. The ebode VLHD38 replaces
your current HDMI cable. The system, consisting of a transmitter and a receiver,
wirelessly streams uncompressed High-Definition videos from any HD video source
device to your HD TV (or projector), placed anywhere in your home. The operating range
is up to 200ft/60m line of sight. Includes USB Power cable which enables you to power
the receiver from a USB port* of your HDTV.
(* The USB port must have at least 1.5 amp. power output.)
3.

Main Features

 Working on the 5.8GHz Frequency (high-speed band)
 HDMI Loop-Through
 Built-in Omni antenna
 With a transmission distance of 200ft/60m LOS with less than 100ms latency
 Power via USB or adapter
Please note: The VLHD38 cannot start-up a source device from standby over infrared if
the connection is not established. Connection can only be established once the source on
the remote location is powered to establish the HDMI handshake with the Transmitter.
You need to turn on the source (DVD, etc.) manually, which is linked to the VLHD38 to
get the infrared function to work. The main reason this slightly inconvenient handling is
required, is because there is a power-saving feature built in. Without this power-saving
feature the VLHD38 would 24/7 require a connection and therefore draws power and will
add additional cost to the home owner.
30-1-2015 6 ebode VLHD38