Technical Assistance; Remote Control - Polk Signa S1 Guia De Inicio Rapido

Thank you for your Polk purchase. If you have a question
or comment, please feel free to call or email us.

Technical Assistance

In North America, call Polk Customer Service at
800-377-POLK(7655) (M–F, 9 a.m.–5:30 p.m. EST)
Outside the US, call +1-410-358-3600
email polkcs@polkaudio.com
Polk Audio
1 Viper Way
Vista, CA 92081
The complete owner's manual can be found online
at www.polkaudio.com
What's in the Box
Sound bar power cord

Remote control

Subwoofer power cord
4' Optical cable
Battery
Connecting Your Signa S1 to Your TV
1. Use the provided Optical cable to connect the
sound bar to the TV.
TV
HDMI OPT AUX
If your TV does not have an Optical output, connect the sound
bar to the TV with an AUX cable (not included).
NOTE: Only optical supports Dolby 5.1 decoding.
2. Remote battery installation:
Insert the provided AAA battery.
Sound bar
Important Product Information
Literature
Subwoofer
3. Connect the sound bar power cord to an AC outlet
4. Position subwoofer and connect to an AC outlet
(for best performance place on the same wall as the TV)
TV
NOTE: The Signa S1 sound bar and wireless subwoofer are
preset at the factory to work together. Should your wireless
subwoofer stop receiving an audio signal, follow these
instructions to re-establish the connection:
1. Turn on your sound bar.
2. Press and hold the LINK button on the back of the
subwoofer for 3 seconds.
3. Simultaneously press and hold Bluetooth
buttons on the sound bar for 5 seconds.
The sound bar will search for a connection while the first and
second LEDs on the sound bar will flash intermittently. The
lights will stop flashing when the sound bar and subwoofer
connect. If the sound bar and subwoofer fail to connect, the
first and second LEDs will flash together 5 times. Repeat steps
above to establish a connection.
5. Turn on your sound bar
Press the Power button
NOTE: Make sure TV internal speakers are off when using
optical and aux inputs.
Remote Control
Power
Bass
Up/Down
Movie Mode
电视回音壁音箱电源线
Night Effect
远程控制
低音炮电源线
4' 光纤线
DESIGNED IN THE USA MANUFACTURED IN CHINA
MODEL: SIGNA S1 FCC ID: WLQAM9117RX IC: 7956A-AM9117RX CAN ICES-3 (B)/NMB-3(B)
This device complies with Part 15 of the FCC Rules. Operations are subject to the following conditions: (1) this device
that may cause undesired operation. may not cause harmful interference, and (2) this device must accept any interference received, including interference
and VOL +
on the sound bar or remote.
Mute
Optical
Bluetooth
AUX
Master Volume
电视回音壁音箱
Up/Down
Music Mode
VoiceAdjust Levels
印刷资料
低音炮