jbc MN 9016 Manual Del Usuario página 3

We appreciate the trust you have placed in JBC by purchasing this equipment. It
has been manufactured with the strictest quality standards in order to give you the
best possible service.
Before using this equipment, we recommend you read these instructions carefully.
The MN 9016 is an electrovalve controlled by the soldering station that allows you to
solder with nitrogen with a minimum consumption.
Once the Nitrogen control module has been connected to the control unit DI 2870, the
module will let the gas flown when taking out the tool from the stand and turning off when
the tool is again placed in its stand and reaches to the sleep temperature.
JBC reserves the right to make technical changes without prior notification.
Nitrogen control module
MN 9016 Ref.9016000
N flow regulation
2
Technical specifications
- N flow regulation: 0,5-3,5 lpm.
2
- Recommended N
- Maximum compressed N
- Recommended N
- Supply: 24V.
- Power: 3W.
- Weight of complete unit: 1,2 Kgs.
- ESD protected housing.
Typical surface resistance: 10
square.
- Complies with CE standards on electrical
safety, electromagnetic compatibility and
antistatic protection.
- RoHS compliant.
This product should not be thrown in the
garbage.
N outlet
2
Maximum pressure: 1 bar.
Compressed N
Maximum pressure: 6 bars.
Connection
2
ENGLISH
flow regulation: 1-2 lpm.
2
pressure: 6 bars.
2
pressure: 5 bars.
2
5 11
-10
input.
2
Ohms/