Medio Ambiente; General Power Tool Safety Warnings - Bosch GWS Professional 22-180 Instrucciones De Servicio

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Nicaragua
Madinisa.....................(505) 2249 8152 / 2249 8153
Ciudad Jardin G-19, Costado Oeste Banco BDF, Apartado
postal 2774, Managua.
Panamá
Zentrum........................................... (506) 301 192
Urbanización Industrial Costa del Este, Via Principal Galera
No. 11 Edificio Zentrum - Bosch, Ciudad de Panamá.
Paraguai
Chispa......................................... (595) 2155 3315
Jose Rivera Y Carios 1988 Casilla De Correo 1106. Asuncion.
Peru
Robert Bosch S.A.C............................(511) 706 1100
Av. Republica de Panama 4045 Buzón Postal Lima 34 (Surquillo) - Lima
Republica Dominicana
Jocasa.........................................(1809) 372 6000
Autopista Duarte, Km. 16 #26, Santo Domingo Oeste.
Uruguay
Epicentro..................................... (59) 82 200 6225
Vilardebó 1173. CP 11800. Montevideo.
Venezuela
Robert Bosch
Venezuela...................(58) 212 207 4511/ 207 4420
Final Calle Vargas, Edifício Centro Berimer,
PB Boleita Norte - Caracas.

Medio Ambiente

Las herramientas y accesorios inservi-
bles, deberán ser sometidas a un recicla-
je ecológico.
En los casos que quieras descartar su herramientas y
accesorios, no tirar en la basura.
Pedimos que entregue a un servicio técnico autorizado
Bosch de herramientas eléctricas que dará el destino
correcto, según las reglas de preservación del medio
ambiente, haciendo la reciclaje correcta de las partes,
cumpliendo así com las leyes locales.
Reservado el derecho de modificación.
F 000 622 319 | 10.2011
Manual GWS 22-180.indd 23
English

General Power Tool Safety Warnings

Read all safety warnings and all
WARNING!
instructions. Failure to follow the
warnings and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2. Electrical safety
a) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges and moving parts. Damaged
or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of electric shock.
3. Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
b) Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure the switch is
in the off-position before connecting to power source
23
English |
Bosch Power Tools
29/11/11 08:34

Publicidad

Tabla de contenido
loading

Tabla de contenido