Replacement Parts List - Omega 90153 Manual De Piezas E Instrucciones De Funcionamiento

OPERATION
1. There are three positions available to adjust the chain
bracket width to fit most engine. Adjust to your best
fit and ensure that the threaded pin is tighten.
2. Secure engine to the chain brackets
3. Engage the Load Leveler hanging chain to the engine
crane hook.
4. Ensure the load is centered.
5. Follow vehicle service manual recommendations to
remove engine.
6. Study and follow engine crane's operator instructions
manual to remove/install engine.
7. When ready to remove engine, lift the engine crane
gradually. Balance the engine at proper angle by
turning the tilt adjustment screw.
8. Lift the engine crane high enough to clear the vehicle.
9. Immediately upon removal and when clear of the
vehicle, lower the load to lowest practical position.
Note: Avoid rolling the loaded engine crane. To help,
position an engine stand if necessary, move only across
smooth, level, seamless surfaces.
10. Before moving, ensure the load:
a. is lowered to lowest practical position and below
center of gravity.
b. is prevented from swinging and inadvertent shifting.
11. Position a suitable engine stand near the removed
engine, then immediately transfer the load to
engine tand.
12. Check to ensure stand is secure before working
on or around.

Replacement Parts List

Item Part#
1 T580-03000-000
2 T580-01000-000
3 T580-01001-000
Description
Hanging Chain
Chain Group
Threaded Pin
Figure 2 - Load Leveler Parts Illustration
! WARNING: To avoid crushing and related injuries,
NEVER work under a loaded engine leveler or
engine crane.
MAINTENANCE
Periodically inspect the Load Leveler. Ensure all parts
move freely. To help prevent rust, wipe clean after each
use. If rust appears, sand affected area and cover with
suitable utility paint. Store the Load Leveler in a clean,
dry area.
REPLACEMENT PARTS
Not all components of the Load Leveler are replacement
items, but are illustrated as a convenient reference of
location and position in the assembly sequence. When
ordering parts, give part number and part description.
Call or write for current pricing: SFA Companies 10939
N. Pomona Ave. Kansas City, MO 64153, U.S.A.
e-mail: sales@omegalift.com; Tel: (888) 332-6419
Fax: (816) 891-6599; Website: http://www.omegalift.com
Qty
1
2
2
3
1
3
2