Raychem QuickStat-TC Manual De Instalación Y Funcionamiento

Specifications
Approvals
Technical Data
Supply voltage
Maximum switching current
GFCI
Ambient setpoint range
(A/AF mode)
Floor setpoint range (F mode) 40°F to 104°F (5°C to 40°C)
Floor limit setpoint range
(AF mode)
Operating temperature range 32°F to 120°F (0°C to 50°C)
Storage temperature range
Kit Contents
A 1 QuickStat-TC thermostat
B 2 Mounting screws
C 1 Floor temperature sensor 15 ft (4.6m)
D 5 Wire nuts
E 1 Screwdriver
400-115-052
F
A
2
120 V, 208 V, 240 V, 60 Hz
15 A
Class A, 5 mA trip level
40°F to 86°F (5°C to 30°C)
40°F to 104°F (5°C to 40°C)
–4°F to 120°F (–20°C to 50°C)
QuickStat -TC
®
Installation & Operation Manual
General Information
Use of this Manual
This manual covers the installation and operation of the Raychem
QuickStat -TC thermostat and must be used with the following
®
document:
• QuickNet System Installation Manual (H57704)
®
Important: For the Tyco Thermal Controls warranty and agency
approvals to apply, the instructions included in this manual and product
packages must be followed.
Features
The QuickStat-TC is an electronic thermostat that must be used with
Raychem QuickNet floor heating mats.
QuickStat-TC provides the following features:
• Integrated Class A, Ground-Fault Circuit Interrupter (GFCI).
• Operates at 120 V, 208 V, 240 V, 60 Hz.
• Switches on your heating system at predetermined times on different
days of the week.
• Offers 4 periods each day that you can set at different temperatures.
• Comes with a preprogrammed schedule that is suitable for most
installations. However, you can customize this program any time you
wish.
• Allows you to reset the thermostat to factory settings.
• Changes the start time of a heating period automatically so that the
desired temperature is reached at the time that you set.
• Controls the temperature of the floor through a temperature sensor
that is placed in the floor construction.
• On/Off switch to turn off thermostat during summer months.
A
B
C
®
D
E