Tripp-Lite NPOE-SPL-G-5VMU Guia De Inicio Rapido página 3

Installation
1. Using existing or newly laid out category cabling, connect your Tripp Lite
NPOE-SPL-G-5VMU Splitter to an IEEE 802.3af-compliant PoE switch or
48V injector.
2. Connect the RJ45 (Data Out) connector to transmit data.
3. Connect the Micro USB (Power Out) connector to supply 5V 1A (5W).
PoE Switch
Data + Power
19-04-419-93398E.indb 3
or
PoE Injector
Cable length up to 328 ft. (100 m)
PoE Splitter
3
Data
Raspberry Pi
5V Power
5/28/2019 3:54:18 PM