Troubleshooting - Panasonic WV-LC1700/G Instrucciones De Operación

Troubleshooting

Check the following before requesting repair.
If a trouble cannot be corrected even after checking and trying remedy, contact your dealer.
Symptom
Power is not turned on.
"NO SIGNAL" appears on the
screen, and no image is dis-
played.
"OUT OF RANGE" appears on
the screen, and no picture is
displayed.
Picture display position is not
proper while the PC input signal
is being selected.
The power cord insulation is
damaged.
The power cord, plug and con-
nectors get hot during use.
The power cord gets hot when
bent or stretched.
"VIDEO LOSS" appears in the
center of the screen, and no
image is displayed.
No reaction is observed by
pressing the front buttons.
20
Cause/solution
Check if the power plug is properly connected to the AC outlet.
Check if the power plug is properly inserted into the AC IN jack
of this monitor.
Check the cables are properly inserted into the connectors.
Check if the cable connection is corresponding with the selected
input signal.
When the PC input signal does not meet the standards of this
monitor, no picture is displayed.
→ Check the specifications of connected PC.
Perform auto adjustment on the PC menu. If the picture display
position is not properly adjusted, perform manual adjustment.
The power cord, plug and connectors are worn out.
If you continue to use it, a fire or an electric shock may occur.
Unplug the power cord immediately, and refer servicing to quali-
fied service personnel.
Check whether the cable is appropriately connected.
Check whether the external devices such as the camera are
turned on.
Press the reset switch to restart this unit.
Reference
pages
–
–
8 - 9, 13
8 - 9, 13
9, 18
18
–
8 - 9
8 - 9