Ellington BHS036157386001 Manual Del Usuario página 5

Assembly Instructions
CAUTION:
Read all the instructions before assembly. Failure to do so may result in faulty assembly and potential injury!
Assemble product on a soft, non-abrasive surface such as carpet or cardboard to avoid damaging the item.
Two people required to assemble heavy item. After final alignment, make sure all bolts are securely tightened
in place.
Remove the parts from the carton and take off all protective material. Identify all parts packed in the carton
against the parts list.
WARNING: Only fully tighten bolt D right away. Loosely assemble the rest of
the chair until all assembly steps are finished. Then tighten all other bolts.
1
Place the Seat Assembly (C) onto a non-abrasive
surface, such as carpet, facing upwards. Thread
bolt (D) into seat assembly (C) and tighten all the
way.
C
3
Fasten the Right Arm (B) to the Seat Assembly (C) by using bolts (E) and washers (F). Keep the bolts
loose.
D
E
F
Page 5 of 8
2
Hang the Right Arm side panel (B) on bolt (D)
via the keyhole slot. Insert and slide down.
C
B
B
D
keyhole slot
C