Using Remote Control - Level mount SMM-08 Instrucciones De Instalación

Attaching Mounting Arms to Wall Mount:
1. Place locking levers on mounting arm in horizontal position
(Figure 12),
2. Slide arms with TV over mounting plate (Figure 13).
3. Rotate Locking Levers to vertical position (Figure 14) to
secure TV to mount.
4. TV may be moved from left to right for final location.
5. Plug in AC power adapter to bottom of mount and wall outlet.
(Figure 15)
Figure 12
Figure 13
Figure 14
Figure 15
Locking TV to Mount:
1. With locking lever in locked position, add padlock to prevent
theft or accidental movement of lever. (Figure 16)
Figure 16

Using Remote Control:

1. Press center button once to extend mount from wall
2. Adjust mount as desired.
3. Press center button again to return mount to seated position
(mount will realign before moving back to wall)
Side View
Top View
Press left button to pan mount left.
Magnetic Holder
AAA x 3
Battery Cover
Back of Remote
Using Cord Management:
1. Use Velcro strap at bottom of mount to secure all wires and
cables. Make sure to leave enough wire above strap to allow
free movement of mount! (Figure 17)
Figure 17
Press top button to tilt mount up. (mount will
not tilt upward from parallel to wall)
Note: Photos taken without TV
or mounting arms installed
Remote
Control
Press right button to pan mount right.
Press bottom button to tilt mount down.
Side View
Top View
Side View
www.LevelMount.com
1-888-229-1459
©2008 Level Mount
Patents Pending