PUREGEAR PureJuice 10K PD Manual De Instrucciones página 3

Instructions:
Using a standard wall, car or computer for charging will
*
take longer than using a USB-PD charger.
To charge the PureJuice 10K PD:
1. Use the provided USB-C cable
by inserting the cable into the
USB-C port on the battery
as shown.
2. Connect the cable into your
wall charger or car charger
as shown.
Please note, you may use
•
your computer if it has a
USB-C port, but charging
times may take longer.
NOTE: Charging times vary based on the charger method and output
amperage.
4
To charge your device:
1. Using your own USB charging
cable, insert the USB-A or USB-C
plug into the corresponding
port on the battery. Charging
will automatically begin and
the status lights will flash. If
the lights do not flash, press
the power button.
Provides up to 3 charges.
Charging Indicator
Light Status:
4 lights = full battery
3 lights = 3/4 battery remaining
2 lights = 1/2 battery remaining
1 light = 1/4 battery remaining
5