Troubleshooting; Disposal And Environmental Protection - LUTEC Padlight P9077 6907701340 Manual Do Utilizador

1. To clean the light and solar panel use a dry clean cloth.
2. Clean the solar panel regularly. Dust might decrease the efficiency of the
panel.
3. Never use strong chemicals as this can damage the plastic parts.
Warning
When charging the fixture via the USB, ensure you use a suitably approved
adapter.

TROUBLESHOOTING

PROBLEM
The fixture will not
illuminate.
The battery does
not fully charge.

Disposal and environmental protection

CAUTION!
Electrical products must not be thrown out with domestic waste.
They must be taken to a communal collecting point for
environmentally friendly disposal in accordance with local
regulations. Contact your local authorities or stockist for advice
on recycling. The packaging material is recyclable. Dispose of
the packaging in an environmentally friendly manner and make it
available for the recyclable material collection-service.
POSSIBLE CAUSE
1. The battery is low or drained. 1. To charge the battery
1. If there is overcast days, the
solar panel may not convert
enough daylight to recharge
the battery sufficiently.
2. There is no enough sunlight.
3. There is dust and debris on
the solar panel.
4. The USB plug isn't properly
connected.
4
CORRECTIVE ACTION
fully.
1. Wait for the sunny day
or charge with USB.
2. Reposition solar panel
to receive more
sunlight.
3. Clean dust and debris
from solar panel.
4. Make sure the USB
plug is fully inserted.