Unpacking
Ensure that the following have been removed from the packing:
•
The Hybridiser.
•
Guarantee Card.
•
3 Hybridisation tubes complete with end caps, seals and grease.
•
Extra Tubes if ordered especially.
Installation
1
Place the unit on a suitable bench, a flat workspace, or in a safety cupboard if
required, ensuring that the air inlet and outlet louvres are not obstructed.
2
Insert some liquid into a tube and place the tube in the Hybridiser. Adjust the feet
by unscrewing them anticlockwise slightly until the unit is level. Check the level by
putting the tube in several positions.
3
Plug the mains cable into the socket on the rear of the unit.
H B - 1 D O P E R A T O R ' S M A N U A L
•
Drip Tray (not Techne Inc). •
•
Decontamination Certificate.
Power Lead.
11