Led Indicators - Triton Blue DMX Spliter 4R-2 Manual De Usuario

LED indicators

Each channel comes with one red power indicator and one green signal indicator. When the unit is powered on 4 red power
indicators are lit up and when the unit receives DMX signal the green indicators are blinking. This is useful to immediately
identify a bad output channel.
LED Status
Power indicator is not lit up or dim while Signal indicator is OK and
signal output is normal.
Both power indicator and signal indicator are not lit up. Also there is
not signal output.
Power indicator is OK. Signal indicator is not lit up while signal output
is normal.
Power indicator is OK. Signal indicator is not lit up and there is not
signal output.
Specifications
Weight & Dimensions
• Length: 482 mm
• Width: 147 mm
• Height: 44 mm
• Weight: 2,5 Kg
• Packing size: 540 x 210 x 80 mm
Power
• AC Power: AC 230V 50 - 60 Hz
IMPORTANT INFORMATION
In order to optimize the recovery and recycling of the materials that old appliances contain and reduce the
impact on human health and the environment, ensure that this product is recycled at the end of its life.
USER MANUAL | DISTRIBUTOR DMX 4R-2 Triton Blue | Rev. 2016 Sept. | www.triton-blue.com
Possibility
Power indicator fails. Check and replace it.
Open circuit between transformer and PCB.
Check the 9V output from transformer to PCB.
Signal indicator fails. Check and replace it.
Send this Splitter to distributor.
9