Descargar Imprimir esta página

AG Neovo CMP-01 Manual De Instalación página 4

Publicidad

1. To ensure safety, please read this manual carefully before installation and follow
the instructions herein. Store this manual in a secure place for future reference.
2. The manufacturer shall not be legally responsible for any equipment damage or
personal injury caused by incorrect installation or operation other than that
covered in this manual.
3. The Mounting Bracket is designed for easy installation and removal. The
manufacturer shall not be liable for damage to equipment or personal injuries
arising out of human factors or acts of God, such as earthquake or typhoon.
4. It is recommended that the projector Mounting Bracket installed by specialists.
5. At least two persons are needed to install or remove the product to avoid hazards
to person or property caused by falling objects.
6. Please carefully inspect the area where the Mounting Bracket is to be installed:
Avoid places that are subject to high temperatures, humidity, or contact with water.
Do not install the product near air conditioning vents or areas with excess dust or
fumes.
Only install on flat ceilings and avoid slanted surfaces.
Do not install in places subject to shocks or vibration.
Do not install in places subject to direct exposure to bright light, at it may cause
eye fatigue when viewing the display panel
7. Maintain sufficient space around the display to ensure adequate ventilation.
8. To ensure a safe installation, first check the structure of the ceiling and select a
secure mounting location.
9. The ceiling should be strong enough to sustain a weight of at least four times the
combined weight of the projector and mounting bracket. The mounting location
must be able to withstand vibrations such as from an earthquake.
10.Do not modify any accessories or use broken parts. Contact your dealer with any
questions.
11. Tighten all screws (do not exert excessive force to avoid breaking screws or
damaging their threads).
12.The maximum loading capacity of the Mounting Bracket is 60Kg. (132 lbs.).
13. This Mounting Bracket is meant to support the display only, do not hang anything
else on it; especially, do not use it to support any person.
14. Drill holes and screws will remain in the ceiling once the projector and Mounting
Bracket are removed. Stains may occur on the ceiling after extended use.
15. Since the ceiling type and the installation of the Mounting Bracket is beyond the
control of the supplier, the warranty of this product is limited to the physical body
of the Mounting Bracket for a period of 3 years.
16. Please consult the English language manual for any dispute on conditions.
Caution
2

Publicidad

loading

Productos relacionados para AG Neovo CMP-01