Identification; Major Components; Setup And Operation - Southwire RR-SW30 Instrucciones De Funcionamiento Y Mantenimientio

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

IDENTIFICATION

MAJOR COMPONENTS

VARIABLE SPEED CONTROL WITH FORWARD AND REVERSE
MILWAUKEE SUPER HOLE SHOOTER 1854-1
7
SET UP AND OPERATION
1. Move the cable reel roller into position for operation using the
forklift pockets on the sides of the unit, or by the lifting eyes
provided at each corner of the unit.
2. Locate the cable reel roller on a surface capable of supporting
the combined weight of the unit plus the reel of the cable.
3. Adjust the distance between the rollers. Remove the four
adjustment bolts connecting the idle roller plate to the reel roller
base. Slide the idle roller assembly to the desired position and
replace the 4 bolts.
4. Load the cable reel onto the cable reel roller such that the
cable feeds from the top of the reel.
5. Use the hand-held control to the set forward or reverse as
required and to adjust the operating speed of the unit.
6. After making the adjustments with the hand controls, a foot
control is provided to switch the unit off and on remotely.
7. Always place the controls so that the operator is clear of the
path of the unwinding cable.
8

Publicidad

Capítulos

Tabla de contenido
loading

Productos relacionados para Southwire RR-SW30

Este manual también es adecuado para:

65241740

Tabla de contenido