Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION--
To reduce the risk of personal injury:
This product is intended solely for non-commercial, non-industrial, indoor,
household use in circulating air; do not use outdoors or for any other
purpose than intended.
Do not hang or wall-mount this product.
Do not run the power cord under carpeting, throw rugs, runners, or similar
coverings. Arrange the power cord away from traffic areas and where it will
not be tripped over.
Always operate the product on a flat, level, stable surface.
WARNING:
This product has a polarized plug (one blade
is wider than the other). To reduce the risk of electric shock,
this plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not modify the plug
in any way.
NOTE: This product employs overload protection (fuse). A blown fuse indicates
an overload or short-circuit situation. If the fuse blows, unplug the product from
the outlet. Replace the fuse as per the user servicing instructions (follow product
marking for proper fuse rating) and check the product. If the replacement fuse
blows, a short-circuit may be present and the product should be discarded or
returned to a qualified service facility for examination and/or repair.
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE
4
Parts
Window Sash Holder
Expandable
panel
(inside)
Power
button
Intake/
Snap-on
Exhaust/
Foot
Exchange
Switch
To Set Up
As a floor or table fan:
1. Slide the Snap-on Feet onto the edged slots,
located on the bottom of the Fan, until
they securely snap into place (see Fig.
1).
2. Place the Fan on a flat, level, stable
surface.
As a window fan:
NOTICE:
Do not set this product in a window that opens and closes
horizontally (side-to-side), as product damage may result.
Expandable
panel (inside)
Speed
Control
Snap-on
button
Thermostat
Foot
Control
button
5
Publicidad
Tabla de contenido
