LEGRAND 430 612 Manual Del Usuario página 3

Jack F
Receiver
Description
- Passive (non-amplified) video balun that allows transmission of real-time CCTV video and low voltage power over UTP cable.
- It consists of Transmitter and Receiver.
Features
- Transmission signal: 1Vpp composite video.
- Support Power suply 12V DC / 24V AC 1A.
- Compatible with worldwide video formats.
- Support UTP cable at least U/UTP cat 5 type.
- Built-in surge&transient protection.
- Super interference rejection.
- Color video and power transmission up to 300 m / 1000 ft.
Maximum current (A) depending on cable lengh see table below :
- Supply voltage: 12V
- Minimum voltage for camera: 10,5V
Lenght
(m)
50
Type
of cable
Cat 5/5e
1070 mA
(AWG24)
Safety instructions
This product should be installed in line with installation rules, preferably by a qualified electrician. Incorrect installation and use can lead to risk of electric shock or fire.
Before carrying out the installation, read the instructions and take account of the product's specific mounting location.
Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be opened and repaired exclusively by personnel trained
and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and guarantees.
Use only Legrand brand accessories.
100 200 300
530 mA 270 mA 180 mA
Jack M
Transmitter