Software Installation; Hardware Installation - Manhattan 179041 Guía De Instalación Rápida

Hi-Speed USB 2.0 SVGA Converter • Quick Install Guide
Thank you for purchasing the MANHATTAN
Converter, Model 179041. This guide presents the basic steps to set up
the device. For operating instructions and specifications, refer to the
user manual at www.manhattan-products.com.

Software Installation

IMPORTANT: The software must be installed before the Converter is
plugged in to the computer.
1. Insert the included CD into the computer's CD-ROM drive. The auto-
run setup should automatically start; if it doesn't, browse to the CD and
manually launch the Setup file.
2. When the InstallShield wizard starts and displays the initial Welcome
screen, click "Next. "
3. When the License Agreement screen displays, check "I agree" and click
"Next" to advance to the Status screen, which will indicate the progress
of the software installation. NOTE: The installation can take several
minutes.
4. When the Installation Complete screen displays, click "Finish. "
Depending on your operating system, you may receive a prompt to
re-start the computer.

Hardware Installation

IMPORTANT: The software must be installed before
the Converter is plugged in to the computer.
1. Connect the Converter to the monitor,
LCD projector or other SVGA device.
2. Plug the Converter into a
USB port on your desktop
or notebook computer.
Windows will identify the
device and automatically
detect and install the
necessary drivers and
software. The Converter is now
ready to use.
2
English
hi-speed usB 2.0 sVga
®
English