Tripp-Lite SmartPro SMX5000XLRT3U El Manual Del Propietario página 6

Quick Installation
Plug your equipment into the
2
UPS.*
Plug your equipment into the UPS using the
additional power cord(s) that came with the UPS.
Note: Additional interconnection cords (C13 to C14) are
available from Tripp Lite. Visit tripplite.com
(Part # P004-006).
* Your UPS is designed to support only electronic equipment.
You will overload the UPS if the total VA ratings for all the
equipment you connect exceeds the UPS's Output Capacity.
To find your equipment's VA ratings, look on their
nameplates. If the equipment is listed in amps, multiply the
number of amps by 230 to determine VA. (Example:
1 amp × 230 = 230 VA). If you are unsure if you have
overloaded the UPS's outlets, see "OUTPUT LOAD LEVEL "
LED description.
Turn the UPS ON.
3
Press and hold the "ON/OFF/STANDBY" button for one
second. The alarm will beep once briefly after one
second has passed. Release the button.
18-08-323-932460.indb 6
2
3
6
2/13/2019 2:53:46 PM