Assembly - HAMPTON BAY ISABELLA 739280 Guía De Uso Y Cuidado

Assembly

1
Connecting the Back and Arms
□ Align the holes in the sides of the back (B) to the matching
holes on the insides of the arms (A).
□ Connect the back (B) to the arms (A) by inserting an M6x10
bolt (AA) and M6 washer (CC) through each of the four
holes in the back (B).
□ Loosely tighten the bolts.
AA
B
3
Tightening the Bolts
□ Make sure the bench stands straight and level with the
ground.
□ Tighten all of the bolts.
□ Cover all exposed bolt ends using the M6 caps (DD).
CC
A
2
Attaching the Seat
Place the seat (C) between the two arms (A), so that the
□
holes in the seat align with the holes in each arm.
□ Connect the seat and arms by inserting the four M6x40
bolts (BB) through the arms (A) into the corners of the seat
(C) on the left and right sides.
□ Loosely tighten the bolts.
B
C
5
BB
A
DD