Westin Automotive Products 25-0760 Instrucciones

AUTOMOTIVE PRODUCTS, INC.
STEP BAR ASSEMBLIES
ENSAMBLES DE ESTRIBOS
MONTAGES DE MARCHE-PIEDS
25-0760
25-0765
25-1870
25-1875
ITEM QTY
1,2 2 STEP BAR, PASSENGER (1) AND DRIVER (2)
3 2 TOP FRONT FRAME BRACKET
4 2 BOTTOM FRONT FRAME BRACKET
5,6 2 REAR BRACKET, PASSENGER (5) AND DRIVER (6)
7 2 POLY TUBE
8 2 1/2-13 X 6.50" HEX HEAD BOLT
9 4 1/2-13 X 2.50" HEX HEAD BOLT
10 4 1/2" FLAT WASHER
11 6 1/2" LOCK WASHER
1,2 2 ESTRIBOS, ACOMPAÑANTE
3 2 SOPORTE SUPERIOR DELANTERO DE LA CARROCERÍA
4 2 SOPORTE INFERIOR DELANTERO DE LA CARROCERÍA
5,6 2 SOPORTE TRASERAS
7 2 TUBO DE POLIETILENO
8 2 PERNOS CON CABEZA HEXAGONAL DE 1/2-13 X 6,50"
9 4 PERNOS CON CABEZA HEXAGONAL DE 1/2-13 X 2,50"
10 4 ARANDELAS PLANAS DE 1/2"
11 6 ARANDELAS DE PRESIÓN DE 1/2"
1,2 2 MARCHE-PIEDS, PASSAGER
3 2 SUPPORT DE CADRE AVANT SUPÉRIEUR
4 2 SUPPORT DE CADRE AVANT INFÉRIEUR
5,6 2 SUPPORTS ARRIÈRE, PASSAGER
7 2 TUBE POLY
8 2 BOULON À TÊTE HEXAGONALE DE 1/2-13 X 6,50 PO
9 4 BOULON À TÊTE HEXAGONALE DE 1/2-13 X 1,50 PO
10 4 RONDELLE PLATE 1/2 PO
11 6 RONDELLE À FREIN DE 1/2 PO
Remove the contents from box and check for damage. Verify all parts are present. Read instructions
STEP 1.
completely before beginning.
Loosen rear shackle bolt facing outside of vehicle. CAUTION: Do not remove.
STEP 2.
. Remove smaller shackle bolt located just above leaf spring and to the rear of shackle mount. Attach rear
STEP 3
bracket with bolt just removed. NOTE: It may be necessary to install rear step bar bolt through slot in
brackets prior to attaching to vehicle. Also, raising vehicle frame with a jack will provide more clearance
around shackle bolt if needed.
Attach front top frame bracket over top edge of frame where it has clearance and slide it next to body
STEP 4.
mount as shown. NOTE: 2 door models, brackets may be tight against the floor. It may be necessary to
tap it over with a hammer.
Position front bottom frame bracket against frame and align hole with the top frame bracket.
STEP 5.
Insert 1/2" fasteners through bottom frame bracket, poly tube and thread into top frame bracket as
STEP 6.
shown. Leave loose.
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
APPLICATION: 1995-00 FORD EXPLORER 2 DOOR
APLICACIÓN: FORD EXPLORER 2 PUERTAS, MOD. 1995-2000
APPLICATION: FORD EXPLORER 2 PORTES 1995 - 00
4 DOOR
4 PUERTAS
4 PORTES
2 DOOR
2 PUERTAS
2 PORTES
CONTENTS - CONTENIDO - CONTENU
(1)
, ACOMPAÑANTE
(1)
1995-01 FORD EXPLORER 4 DOOR
FORD EXPLORER 4 PUERTAS, MOD. 1995-2001
FORD EXPLORER 4 PORTES 1995 - 01
3
Y CONDUCTOR (2)
(1) Y CONDUCTOR
ET CONDUCTEUR (2)
(1) ET CONDUCTEUR (2)
4 5
TOOLS - HERRAMIENTA - OUTILS
3/4" SOCKET
3/4" WRENCH
21MM SOCKET
14MM SOCKET
HAMMER
RATCHET
TORQUE WRENCH
DADO DE 3/4"
LLAVE DE TUERCAS DE 3/4"
DADO DE 21MM
DADO DE 14MM
(2)
MARTILLO
MANERAL
LLAVE DE TORQUE
DOUILLE 3/4 PO
CLÉ 3/4 PO
DOUILLE 21MM
DOUILLE 14MM
MARTEAU
CLIQUET
ClÉ DE COUPLE
WO: 75-0157 REVISION D 9/9/08
6 7