Installation Guidelines - INVENTOR INVMS98A2 Manual Del Propietário

7. INSTALLATION GUIDELINES

Position
Upon the positioning of this unit, keep in mind the floor must be flat and sturdy and the
room should be well ventilated, without additional heating sources nearby.
2.
Wait at least 4 hours before
connecting the appliance to the
power supply, thus, allowing all
fluids to settle in the compressor.
EN
1.
ventilation surrounding the
unit. The rear end (backside)
of this appliance should
stand against a wall allowing
sufficient air ventilation as
follows:
➟ 20cm from the top
➟ 15cm from the back
➟ 40cm from the rest sides
3.
Upon initial use, operate continuously
for 24 hours, thus ensuring the correct
temperature is reached and smooth
operation of the unit is achieved.
Allow sufficient air
9