WARNING! RISK OF INJURY!
To avoid personal injury and damage to the appliance, never insert
►
or place your hands or any foreign objects into the feed tube.
Do not change accessories unless the drive is stationary and the
►
mixer is unplugged from the power supply! The appliance will run on
for a short time after being switched off!
Never leave the appliance unattended!
►
Before changing accessories or additional parts that are in motion
►
during operation, the appliance must be switched off and disconnected
from mains power.
Before first use
■
Remove all packaging materials from the appli-
ance.
■
Clean the appliance as described in the section
"Cleaning and care".
■
Ensure that all parts are completely dry before
operating the appliance.
Assembling the appliance
NOTE
►
The appliance will not start until the bowl
and the lid
are correctly attached.
1) Place the motor unit
that the sucker feet can attach firmly and the
appliance stands firmly in place.
2) Place the bowl
so that the arrow
towards the open lock symbol
motor unit
. Then turn the bowl
arrow
points to the closed lock symbol
and the bowl
clicks into place.
If you want to work with the cutting blades
assemble the appliance as described in the section
"Cutting blades".
If you want to work with the food processing at-
tachments, assemble the appliance as described
in the section "Food processing attachments".
KM 250 B1
on a flat surface so
onto the motor unit
on the bowl
points
on the
until the
Cutting blades
1) Place the cutting blades
shaft
must correctly fit into the take up of the cutting
blades
cannot be properly attached.
2) Place the lid
arrow
arrow
on the bowl
3) Turn the lid
points to the arrow
symbol
4) Place the pusher
5) Insert the plug into a mains power socket.
,
onto the drive
. The flattened side of the drive shaft
. Otherwise the cutting blades
onto the bowl
on the lid
coincides with the
and the opened lock symbol
.
until the arrow
and the closed lock
on the bowl
.
into the feed tube
GB │ IE
so that the
on the lid
.
│
15
■