- If [Data 00] is 00 (3D On), [Data 03] has no
meaning.
- If [Data 00] is 01 (3D off ) or 02 (3D to 2D), [Data
01], [Data 02] and [Data 03] have no meaning.
- If [Data 00] is 03 (2D to 3D), [Data 01] and
[Data 02] have no meaning.
- If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data
03] works when 3D Mode (Genre) is manual
only.
- All 3D pattern options ([Data 01]) may not be
available according to broadcasting/video
signal.
[Data 00]
[Data 01]
00
O
01
X
02
X
03
X
X : don't care
Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02]
[Data03][x][t][ ][Set ID][ ][NG][Data00][x]
25. Extended 3D(Command: x v) (only 3D models)
(Depending upon model)
• To change 3D option for TV.
Transmission [x][v][ ][Set ID][ ][Data 00][ ]
[Data 01][Cr]
[Data 00] 3D option
00 : 3D Picture Correction
01 : 3D Depth (3D Mode is Manual Only)
02 : 3D Viewpoint
06 : 3D Color Correction
07 : 3D Sound Zooming
08 : Normal Image View
09 : 3D Mode (Genre)
28
[Data 02]
[Data 03]
O
O
X
X
X
X
O
O
[Data 01] It has own range for each 3D option
determined by [Data 00].
1) When
[Data 00] is 00
00 : Right to Left
01 : Left to Right
2) When
[Data 00] is 01, 02
Data
Min: 0 - Max: 14 (*transmit by
Hexadecimal code)
Data value range(0 - 20) converts Viewpoint range
(-10 - +10) automatically (Depending upon model)
- This option works when 3D Mode (Genre) is
manual only.
3) When
[Data 00] is 06, 07
00 : Off
01 : On
4) When
[Data 00] is 08
00 : Revert to 3D video from 3D-to-2D
converted 2D video
01 : Change 3D video to 2D video,
except 2D-to-3D video
- If conversion condition doesn't meet, command
is treated as NG.
5) When [Data 00] is 09
00 : Standard
02 : Cinema
04 : Manual
Ack [v][ ][Set ID][ ][OK][Data00][Data01][x]
[v][ ][Set ID][ ][NG][Data00][x]
26. Auto Configure (Command: j u)
(Depending upon model)
• To adjust picture position and minimize image
shaking automatically. It works only in RGB (PC)
mode.
Transmission [j][u][ ][Set ID][ ][Data][Cr]
Data 01 : To set
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
01 : Sport
03 : Extreme
05 : Auto