Tune Command; Programme; Control; Input Select - LG UX96 Serie Manual De Instrucciones

18 Tune Command (Command: m a)
► Select channel to following physical number.
Transmission [m][a][ ][Set ID][ ][Data 00][ ]
[Data 01][ ][Data 02][Cr]
Data 00 : High channel data
Data 01 : Low channel data
ex. No. 47 -> 00 2F (2FH)
No. 394 -> 01 8A (18AH),
DTV No. 0 -> Don't care
Data 02 : [Antena]
0x00 : Analog Main
0x10 : DTV Main
0x20 : Radio
[Cable]
0x80 : Analog Main
0x90 : DTV Main
0xA0 : Radio
[Satellite]
0x40 : DTV Main
0x50 : Radio Main
Channel data range
Min: 00 Max: 270F (0 to 9999)
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
Data Min : 00 to Max : 7DH
19 Programme Add/Skip (Command: m b)
► To set skip status for the current Programme.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Skip
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
20 Key (Command: m c)
► To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data IR CODES
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
01 : Add
21 Control Backlight (Command: m g)
► To control the backlight.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
22 Input select (Command: x b)
(Main Picture Input)
► To select input source for main picture.
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data Structure
MSB
0 0 0 0
External Input
External Input
0 0 0
0 0 0
0 0 1
0 1 0
0 1 1
0 1 1
1 0 0
1 0 0
1 0 1
Input Number
0 0 0
0 0 0
0 0 1
0 0 1
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
LSB
0 0 0 0
Input Number
Data
0 DTV
1 Analogue
0 AV
0 Component
0 RGB
1
0
HDMI
1
0
Data
0 Input1
1 Input2
0 Input3
1 Input4
7