Publicidad
Idiomas disponibles
Idiomas disponibles
Vanilla shake
¼
l milk
250 g vanilla ice cream
125 g ice cubes
½
1
tsp. sugar
Crush the ice cubes using the level P. Place the remaining ingredients into the mixer. Mix everything at level 2
until the liquid has a smooth consistency.
Cappucino shake
65 ml cold expresso (or a very strong coffee)
65 ml milk
15 g sugar
65 g vanilla ice cream
100 g ice cubes
Crush the ice cubes using the level P. Add the expresso, milk and sugar. Mix everything together at level 2 until
the sugar has dissolved. Finally, add the vanilla ice cream and then briefly mix everything together at level 1.
Tropical mix
125 ml pineapple juice
60 ml papaya juice
50 ml orange juice
½
small tin of peaches with juice
125 g ice cubes
Crush the ice cubes using the level P. Place all ingredients into the mixer and blend them together at level 2.
CLEANING AND MAINTENANCE
Caution:
Handle the blade assembly with care as the blades are sharp!
Only the jug and blade assembly can be cleaned in a dishwasher and the temperature setting of the
dishwasher should never exceed 70°C.
Never use any water or liquid more than 70°C to clean any detachable parts.
1. Fill the jug half-full with water (< 70°C) and a little cleaning agent. Turn the control knob to P position for a
few seconds.
2. Remove the mains plug from the power outlet.
3. Take off the jug from the motor base. Rinse the jug and dry it thoroughly.
4. Do not immerse the motor base in water or any other liquid. Use a humid cloth to clean the motor base and
dry it thoroughly. Do not use abrasive cleaning materials.
5. The blade assembly can be took off from the jug. Turn the jug upside down. Move the blade base clockwise
to release it from the bottom of jug. Pull the blade base out.
6. Disassemble the other parts after each use and wash them in soapy water (< 70°C). Then rinse with clean
water (< 70°C) and dry thoroughly.
CAUTION
Never use boiling liquids.
Never run the blender empty or with solids only.
To reduce the risk of injury, never operate the appliance without the lid and measuring cap in place.
Make sure the lid seal ring and bottom seal ring are in their places when reassembling.
- 20 -
80.00.5001
Publicidad
