Dmx Linking - Chauvet DJ Intimidator Spot LED 350 Guía De Referencia Rápida

Intimidator™ Spot LED 350 QRG
Mounting
Product
Mounting
Diagram
Control Panel
Description

DMX Linking

Starting
Address
Master/Slave
Connection
Before mounting this product, read the
Bracket Attachment (x2)
Rubber Feet (x4)
Safety Loop Attachment Point
When using only one mounting clamp with this fixture, you must use a
clamp with a captive bolt to prevent accidental loosening.
Button Function
<MODE/ESC> Exits from the current menu or function
Navigates upwards through the menu list and increases
<UP>
the numeric value when in a function
Navigates downwards through the menu list and
<DOWN>
decreases the numeric value when in a function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
The Intimidator™ Spot LED 350 can work with a DMX controller when linked
by DMX serial connections. Instructions for connecting and configuring this
product for DMX operation are in the User Manual. If you are not familiar with
DMX, download the DMX Primer from www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 499.
The Intimidator™ Spot LED 350 uses the DMX data connection for its
Master/Slave mode. Instructions for connecting and configuring this product for
Master/Slave operation are in the User Manual.
Safety
Page 4 of 72
Notes.
EN