Installation Instructions - Gladiator Garageworks GAWUXXGFTG Instrucciones De Ensamblaje

Golf Caddy Use Requirements
Intended to be installed on Gladiator
panel or GearTrack ® channels.
Maximum weight limit is 25 lbs (11.34 kg) for the shoe shelf.
Maximum weight limit is 50 lbs (22.68 kg) for the golf bag shelf.
Maximum weight limit is 75 lbs (34.0 kg) for the golf bag caddy.
Unpack the Golf Caddy Parts
Remove the golf caddy parts and fasteners, and dispose of/recycle
all packaging materials.
Assemble Golf Caddy
F1 F2
⁵⁄₁₆
F1 " Allen-head bolt (14)
⁵⁄₁₆
F2 " Flange nut (12)
F3b Phillips-head screw (4)
Gather the required tools before starting assembly.
Tools Needed:
³⁄₈" Nut driver
¹⁄₂" Nut driver
Tools Supplied:
Allen wrench
1. Create a shoe shelf by using ⁵⁄₁₆"Allen-head bolts (F1), to attach
the five rods to both sides of the golf caddy, as shown.
⁵⁄₁₆
A. "Allen-head bolt (F1)
2

INSTALLATION INSTRUCTIONS

® Garageworks GearWall
F3b F7
F7 Carriage-head bolt (8)
F10 Acorn nut (4
Phillips screwdriver
A
2. Using ⁵⁄₁₆" Allen-head bolts (F1) and ⁵⁄₁₆" flange nuts (F2), attach
the golf bag shelf to the sides as shown.
®
3. Stand the golf caddy upright. Using carriage-head bolts (F7) and
flange nuts (F2), attach the upper mounting bracket to the two
top holes in each side as shown.
F10
4. Completely tighten the nuts.
5. Using carriage-head bolts (F7) and flange nuts (F2), attach the
lower mounting bracket to the two slots in each side as shown.
NOTE: Hand tighten the nuts attaching the lower bracket. This
bracket will need to be adjusted to mount the golf caddy on the
wall.
A
A
A
⁵⁄₁₆
A. " Flange nut (F2)
⁵⁄₁₆
B. " Allen-head bolt (F1)
B
B
A. Flange nuts (F2)
B. Carriage-head bolts (F7)
C. Upper mounting bracket
D. Lower mounting bracket
B
C
D