Tripp-Lite B118-002-UHD El Manual Del Propietario página 5

Installation
3 Connect an available Output port on the splitter to the HDMI input
port of your display.
Note: The length of the HDMI cable connecting the splitter to the display
must not exceed 23 ft. (7 m).
4 Repeat step 3 for the remaining Output ports on the splitter.
5 Connect the included power supply to the splitter, then plug it
into a Tripp Lite Surge Protector, Power Distribution Unit (PDU), or
Uninterruptible Power Supply (UPS).
Turn on the power to the HDMI source, splitter, and displays.
6
Cascade Installation
The number of connected monitors can be expanded by cascading
up to three levels of splitters together. Up to 512 displays can be
connected by cascading a B118-008-UHD from each port in a three
level installation. It is recommended you use Tripp Lite's
P569-XXX-CERT Series Premium High-Speed HDMI cables.
Make sure the power to all the devices you will be connecting is
1
turned off.
2 Connect the HDMI source to the Input port on the first level
splitter.
Note: The length of the HDMI cable connecting the source to the splitter
must not exceed 16 ft. (5 m).
3 Connect an available Output port on the first level splitter to the
HDMI Input port on a second level splitter.
Note: The length of the HDMI cable connecting the first and second level
splitters must not exceed 10 ft. (3 m).
4 Repeat Step 3 for each additional splitter you wish to add (no
more than 3 levels of splitters can be cascaded).
18-04-038-9336A7.indb 5
5
5/11/2018 8:23:28 AM