Care And Maintenance; Troubleshooting - Quoizel LWS3747B Manual Del Usuario

STEP 5:
a. Install correct bulbs referring to fixture markings and/or labels for maximum wattage.
STEP 6:
a. Make sure the surface of the exterior wall and fixture
backplate are free of dirt.
b. Using silicone sealer (not included) start on one side of
fixture backplate and follow contour where the fixture
backplate meets the exterior wall surface.
c. Proceed to seal around backplate.
NOTE: To ensure proper moisture drainage, do not seal
bottom of fixture backplate.
Your installation is now complete! Restore electricity
and save this sheet for future reference.

CARE AND MAINTENANCE

Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean
fixture as they may damage the finish.

TROUBLESHOOTING

PROBLEM
Bulbs will not light.
Fuse blows or the
circuit breaker trips
when light is turned
on.
2019 QuoizelInc.
POSSIBLE CAUSE
1. Bulb is burned out.
2. Power is off.
3. Faulty wire connection.
4. Faulty switch.
Crossed wires or power wire is
grounding out.
Exterior Wall Surface
CORRECTIVE ACTION
1 . Replace light bulb.
2. Make sure power supply is on.
3. Check wiring.
4. Test or replace the switch.
Check wire connection.
3
Silicone Sealer
Fixture Backplate
Printed in China