Publicidad
Idiomas disponibles
Idiomas disponibles
Washer
Possible causes
Washer pauses
This is
during the spin
normal
cycle
Can hear but not
This is
see the water at
normal
the end of the cycle
Performance
Possible causes
(washer)
Washer is unplugged
Water supply
Controls are not
set properly
Washer won't
operate
Lid is open – the
safety feature is
preventing agitation
and spinning when
the lid is open
The circuit breaker/
fuse is tripped/blown
Electronics need
to be reset
START was not pressed
Lid magnet is missing
Shifting mechanism is
Movement inside
disengaging to return
machine when
to initial position
(only in spin)
What to do
The washer can be paused during the
spin cycle to remove water containing
Pump is leaving water at inlet and it is
diluted with soap and clean water.
What to do
Make sure cord is plugged securely into a
working outlet.
Turn both hot and cold faucets fully on.
Check controls.
Close lid and restart cycle, from the
beginning if necessary.
Check house circuit breakers/fuses.
Replace fuses or reset breaker.
Washer should have a separate outlet.
Unplug washer, wait 2 minutes, plug back
in, and press START.
Press START.
Call for service.
the shifter will disengage the motor
before completely shutting down
(only in spin).
If the lid is raised before the motor is
disengaged, it will resume when lid is
closed
.
21
Publicidad
