Installation Instructions
WINE CENTER DIMENSIONS
34.1-35.1" *
(86.6-89.1 cm)
*1" of adjustment
with leveling legs
THE INSTALLATION SPACE
10" (25.4 cm)
34-1/2" - 35"
Max.
(87.63 - 88.9 cm)
24" (61.0 cm)
PRODUCT CLEARANCES
When installed in a corner:
• Allow 4" (10 cm) min. clearance on the hinge side for
the 90° door swing and to allow racks to slide out.
• Allow 13" (33 cm) minimum clearance on the hinge
side for a full 115° door swing.
13" Minimum
to Wall
115°
49-1000492 Rev. 3
23-3/4"
(60.3 cm)
Locate
Outlet in
Grey Area
24" (61.0 cm)
90° Door Swing
90°
4" Minimum
to Wall
23.40"
(59.5 cm)
REMOVE PACKAGING
NOTE: The toekick and door handle (some models)
are included in the packaging which covers the top of
the unit. A wrench for the handle installation is included
in the accessory bag located inside the wine center.
•
Remove tape and glue residue from surfaces before
turning on the wine center. Rub a small amount of
liquid dish soap over the adhesive with your fingers.
Wipe with warm water and dry.
NOTE: Do not use sharp instruments, rubbing
alcohol, flammable fluids, or abrasive cleaners
to remove tape or glue. These products can
damage the surface of your wine center. For more
information, see "Wine Center Safety."
•
Dispose of/recycle all packaging materials.
WARNING
Small objects are a choke hazard
for children. Remove and discard any parts not
used.
CLEAN BEFORE USING
After you remove all of the packaging materials, clean
the inside of the wine center before using it. See the
cleaning instructions in "Wine Center Care."
47"
(119.4 cm)
11