Fit The Hedge Trimmer Head; Install The Battery Pack; Remove The Battery Pack - GreenWorks Pro ULTRAPOWER 60X RANGE 60PH20F Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
9.1.1
ASSEMBLE THE BLADE GUARD
1. Put the machine on a flat and smooth surface.
2. Align the holes with screws then put the blade guard on
the blade.
3. Tighten the nut.
Only use with handle and guard properly assembled to
hedge trimmer. The use of the hedge trimmer without the
proper guard or handle provided may result in serious
personal injury.
9.1.2
ASSEMBLE THE REAR HANDLE
1. Align the holes on the rear handle with holes on the
machine.
2. Put the screws through the holes.
3. Tighten the srews.
WARNING
English
9.1.3

FIT THE HEDGE TRIMMER HEAD

The hedge trimmer head can be mounted directly into handle
pole so as to achieve the standard length.
1. Remove the black protective cover.
2. Insert the handle pole into the hedge trimmer head.
3. Align the holes to insert the screw.
4. Tighten the screw.
Periodically check the connections to ensure that they are
tightened securely.
9.1.4

INSTALL THE BATTERY PACK

If the battery pack or charger is damaged, replace the
battery pack or the charger.
Stop the machine and wait until the motor stops before
you install or remove the battery pack.
Read, know, and follow the instructions in the battery
and charger manual.
1. Align the lift ribs on the battery pack with the grooves in
the battery compartment.
2. Push the battery pack into the battery compartment until
the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
9.1.5

REMOVE THE BATTERY PACK

1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
8
WARNING
WARNING

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido