Descargar Imprimir esta página

South Shore 9028 Instructivo De Armado página 15

Ocultar thumbs Ver también para 9028:

Publicidad

8
3-À l'aide des vis -116- fixer -33- au mur en alignant les trous vis à vis le croisement des lignes.
3-À l'aide des vis -116- fixer -33- au mur en alignant les trous vis à vis le croisement des lignes.
S'assurer que le support -33- est au niveau en vissant la première et la dernière vis avant de
S'assurer que le support -33- est au niveau en vissant la première et la dernière vis avant de
visser les autres pour finir.
visser les autres pour finir.
3-Using screws -116- attach the part -33- to the wall by aligning the holes with the intersecting
3-Using screws -116- attach the part -33- to the wall by aligning the holes with the intersecting
marks of the studs and your horizontal line. Start with the holes at each end to ensure that the
marks of the studs and your horizontal line. Start with the holes at each end to ensure that the
support -33- is level before continuing with the other screws.
support -33- is level before continuing with the other screws.
3-Usando tornillos -116- adjunte la parte -33- a la pared alineando los agujeros con las marcas
3-Usando tornillos -116- adjunte la parte -33- a la pared alineando los agujeros con las marcas
de intersección de los postes y la línea horizontal. Empieze con los orificios en cada extremo
de intersección de los postes y la línea horizontal. Empieze con los orificios en cada extremo
para asegurar que el soporte -33- este anivelado antes de continuar con los otros tornillos.
para asegurar que el soporte -33- este anivelado antes de continuar con los otros tornillos.
Stud
Stud
Montant
Montant
Estructura
Estructura
Wall / Mur / Pared
Line / Ligne
116 (x ) 4
33(x1)

Publicidad

loading

Este manual también es adecuado para:

90299030676