Belkin FastFit Manual De Instrucciones

FastFit
™
KEYBOARD COVER
Delivering the best typing experience. Enjoy!
Pour une frappe optimale. Profitez-en!
Brindándole la mejor experiencia al teclear ¡Disfrute!
Product Overview
Vue d'ensemble du produit
Descripción general del producto
1 Keyboard 4 Status LED
Clavier Voyant d'état
Teclado Luz LED de estado
2 Bluetooth® pair button 5 Charging port (micro-USB)
Bouton de couplage Bluetooth® Port de charge (micro-USB)
Puerto de carga (micro-USB)
Botón de enlace Bluetooth®
3 iPad holders 6 On/Off Switch
Interrupteur
Two viewing angles
Supports pour iPad Interruptor de
Deux angles de visionnement encendido/apagado
Soportes para iPad
2 ángulos de visionado
5
4 To start, charge your keyboard by connecting the USB cable to an
appropriate USB power source (e.g. laptop, USB wall charger (not
6
included), etc.) and the micro-USB to your keyboard.
When the battery is fully charged, the Status amber LED turns OFF.
3
This keyboard is "Simple Secure Pairing" enabled; therefore, just place
2
your iPad in one of the channels and then:
1 Go to the Home screen on your iPad and tap on
"Settings > General > Bluetooth."
2
Turn Bluetooth to "On."
3 Turn on the keyboard and press and hold the "Pair" key.
1
4 The Status LED will flash blue on the keyboard and the
keyboard will show up under "Devices" on the tablet. Select
"Belkin Bluetooth Keyboard." NOTE: When pairing and charging
simultaneously, the amber charging light will remain on while the
blue pairing light flashes.
5
If, after 60 seconds, pairing fails, you will have to repeat the
steps above. The Status LED will flash blue while the keyboard is
not paired. You can view the status from the screen of the iPad.
If you are prompted to enter a code, just enter the code generated
on-screen by your keyboard.
After creating a paired link, you do not need to repeat the pairing process;
the keyboard automatically links to the tablet when both devices are
switched on. Pairing must be performed every time you want to use the
keyboard with a different tablet.
The keyboard is designed to prolong battery life and will enter into
battery-saving mode under prolonged inactivity. To wake the keyboard,
press any button. The Status LED will flash blue while the connection
is being reestablished, and will be solid blue for two seconds when the
connection is successfully established. The Status LED then turns off
during ongoing operation.
If the battery is low, the Status LED will flash amber for 60 seconds.