Technical Specifications; Favor Leer Este Manual Antes De Usar El Equipo - B&G electronics PW-50 Manual De Instalación Y Funcionamiento

PW-50 v3 PW-50 v3
AUTOMATIC FEEDBACK CONTROL (AFC)
If acoustic feedback would occur while PTT or INTER are on (caused, for instance, by the
opening of a door or window), the equipment will detect and automatically fi x the issue
by decreasing the volume. After the event takes place, the equipment will attempt to rise
the volume back to the level defi ned by the user, as long as AFC is not triggered again.
ENERGY SAVING FEATURES (Automatic Shut Down, ASD)
Partial Shut Down (PSD)
If the incoming voltage is below 13VDC, after 5 minutes of inactivity the equipment
activates PSD mode. This change is indicated by the turning off the keyboard's backlights.
While on PSD mode, upon pressing any key the respective function will execute normally
and the equipment will return to normal energy consumption mode.
Total Shut Down (TSD)
The equipment constantly tracks the incoming voltage status. If the incoming voltage
goes below 12VDC, the equipment will automatically shut down any function and
auxiliary load. While on TSD, upon pressing any key the backlights will blink 3 times and
the function controlled by the pressed key will not execute.
Once the equipment detects that the incoming voltage exceeds 12.5VDC again, the
equipment will return to its normal operation.

TECHNICAL SPECIFICATIONS

Electronic Unit
Loudspeaker
DIMENSIONS
Keyboard Control
Internal Speakers
INPUT VOLTAGE 12 - 14.9 VDC
INPUT CURRENT 12 Amps @ 13.6 VDC (50W Loudspeaker)
STAND BY CURRENT <200 mA
AUDIO FREQUENCY 330Hz - 5600 kHz
OUTPUT POWER 42W RMS - 8 Ohm
SIREN FREQUENCY 440 - 1750 Hz
If voltage drops below 12V for 5 seconds or longer, the equipment will cease
LOW VOLTAGE SHUTDOWN
to work and resume operation when system voltage exceeds 12.5V
B&G ELECTRONICS
ONE YEAR LIMITED WARRANTY
BYG Electrónica S.A.S. guarantees that this product leaves the factory free from defects related to materials and
manufacturing. If for any reason a failure related to materials and manufacturing were to occur during the period
of one year after the date of purchase, BYG Electrónica S.A.S. would repair or replace the failing equipment free
of charge.
This warranty shall be voided if the product is modifi ed, tampered with, misused, or subjected to abnormal working
conditions. This warranty does not cover physical damage to the product surface. This warranty does not apply
when the malfunction results from the use of this product in conjunction with accessories, other products, or
peripheral equipment not designed by BYG Electrónica S.A.S.
3.7 H x 10.9 W x 14.8 D cm 1.5''H x 4.3''W x 5.8''D
13.2 H x 9.4 W x 11.3 D cm 5.2''H x 3.7''W x 4.5''D
2.5 H x 0.7 W x 5.4 D cm 1.0''H x 0.3''W x 2.1''D
8.0 H x 5.6 W x 9.5 D cm 3.2''H x 2.2''W x 3.7''D
8 8
PW-50
MANUAL DE INSTALACIÓN Y OPERACIÓN

FAVOR LEER ESTE MANUAL ANTES DE USAR EL EQUIPO

v3.0
Español
ES 1.0.0