CleAn dIReCtlY AFteR eVeRY USe
CAUtIon: Ensure the jug is cold before removing it from the base. Or, if removing with care, rinse with cold water immediately to
cool down the jug and avoid burning risks.
CAUtIon: In case the base needs to be cleaned unplug it first and use only a damp cloth. Make sure the connector is dry before
operation. Do not immerse the base in water neither put in the dishwasher.
1
2
1� Remove the jug from the base.
2� Remove seal from lid.
3� Remove the whisk, and the spring from the whisk.
CAUtIon: Only use non-abrasive
cleaning materials. Do not use abrasives,
sharp objects, brushes: risk of scratches and
harm to the jug coating.
3
4 a
4 a� Hand washing: wash inner jug, seal, lid, whisk
and spring with detergent and rinse with warm/hot
water. Do not use abrasive material that might damage
the surface of the equipment. Don't immerse in water.
4 b� dishwashing: put all parts except the base in
the dishwasher at maximum 70°C/158°F.
4 b
5� Dry all Aeroccino parts
with a fresh and clean
towel, cloth or paper and
reassemble all parts.
CAUtIon: Do not
immerse neither the jug
nor the base in the water.
CAUtIon: Do not
place directly over the
dishwasher pin as it may
cause damage to inner
coating.
CAUtIon: If the
bottom part of the jug is
wet, dry it before putting
it back in contact with
the base connector.
en
7