OPERATION
Settings
Your appliance has the following setting options:
Blowerlevel
D
– 0: Off
– 1: Gentle air flow
– 2: Stronger airflow
Coldsettingandtemperaturesetting
–
❄
: Interrupts the hot air supply with cold for
setting the style of the hair
– 1: Moderate temperature for gently drying
and styling
– 2: High temperature for fast drying
The separate temperature and blower settings
allow you to control the temperature individually
according to your hair type (fine, straight, curly
or thick).
Changingthestylingattachments
1
Remove the attached styling attachment by
pressing catch
and twisting the attachment
B
to the right slightly.
B
2
Place the required styling attachment over the
catch in line with the recess, press catch
let the styling attachment latch into place.
Notes:
The diameter of the styling attachment deter-
7
mines the size of the curls.
__________________________________________________________
C
and
B
The styling attachment with ø 25 mm is suitable
7
for smaller curls and waves.The retractable
brushes make it easy to remove from your
hair and ensure long-lasting styling results. To
retract the brush, turn the knob at the top on
the styling attachment.
The 38 mm styling attachment is suitable for
7
softly cascading hair styles or medium curls
and waves.
By using the 50 mm styling attachment, you
7
can create an especially large volume for long
hair, as well as large curls and waves.
Usingasahairstyler
Check if the mains voltage on the type plate (on
the handle of the device) corresponds to your
local mains supply.
1
Towel dry your hair thoroughly after washing.
2
Plug the power cord
3Turn on the appliance with switch
the blower level.
4Set the temperature level with switch
5
If required, you can interrupt the hot air supply
when drying by turning switch
setting).
into the wall socket.
F
and set
D
.
C
to »
« (cold
❄
C
15
ENGLISH