WBOX Technologies WBXPSU1A12V Guía De Usuario página 3

Connection description
LED(GREEN)
LED(RED)
BATTERY
*
TEST
LED(GREEN)
LED(RED)
BATTERY
*
TEST
*BATTERY TEST SWITCH
Before connecting to AC power for the first time, this switch can be used for activating the battery;
After connecting to AC power, the battery will be activated automatically during AC power failure,
without pushing this switch.
Protection
Over-voltage protection
Over-current protection
Short circuit protection
Caution
- Make sure Correct input voltage is provided
- This equipment must be installed in a controlled environment.
- Only suited for permanently powered systems.
- Make sure the power supply is well ventilated.
- This equipment must be grounded.
- Use 2.5mm2 gauge mains wire.
-Improper storage and installation environment may shorten the life of this
equipment and cause malfunctions.
www.wboxtech.com
OUTPUT FUSE
BATTERY
BATTERY OUTPUT
OUTPUT FUSE
BATTERY
BATTERY OUTPUT1
Over charge protection
Over discharge protection
All content and specifications are subject to change without prior notice.
12V1A,2A,3A
DC OUTPUT
FUSE
12V5A
DC OUTPUT
FUSE
OUTPUT2
INPUT FUSE AC INPUT
5X20
L
INPUT FUSE AC INPUT
5X20
L
CAUTION
No servicable components
Do not disassemble
GND N
GND N
REV1