FAN INSTALLATION on the RADIATOR
1.
Use the provided Fan Screws to install the Fans on the Radiator.
2.
Connect each 4-Pin Fan Power Connector in series as diagram below.
Finally connect the provided Fan Power Cable to motherboard.
Fan Power Cable
Connect this Fan Power Cable to motherboard
07
FAN INSTALLATION on the RADIATOR
3.
Connect each 3-Pin LED Cable in series as diagram below.
Then connect the provided ARGB LED CABLE to motherboard or I/O Ports.
ARGB LED CABLE
Connect this ARGB LED CABLE to
Pump's ARGB 3-Pin connector for
Daisy Chain Lighting Effect.
08