Connections - Pfannenberg EB 2.0 Serie Libro De Instrucciones

6 Connections

WARNING:
followed by electric connections. Remove the caps inside the hydraulic fittings connection before to connect the
chiller to your device.
WARNING:
of solid particles in the hydraulic system might cause the loss of warranty.
Hydraulic connections. For the hydraulic connection please refer to the enclosed hydraulic plan. The flow rate
and the fluid circulation direction must be respected during connection in accordance with INLET-OUTLET
identification plates.
CAUTION!
Remove the caps inside the hydraulic fittings connection before to connect the chiller to your device.
CAUTION!
70040-106_01-E_EN-DE-IT-ES-FR-RU.docx
English
Hydraulic connections are the first ones to be assembeled during installing operation, to be
The chillers has been cleaned by means of specific cleaning products. The eventual findings
Fill the tank before connecting Hydraulic tubes (as described in the start-up procedure).
Example of Hydraulic connection plate
Picture 3 –Hydraulic connection plate
In case of unit with tank, please fill the tank before connecting Hydraulic tubes.
Example of Electric connections
The unit must be electrically connected by the customer
Picture 4 – Electric connection plate
8