Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3. To fit the plastic hose, insert it into the air intake on top of the appliance. Press
until it clicks into position (Fig.4).
NOTE:
1) To remove the plastic hose, unplug from the power socket, and then release
the hose from the air intake.
2) Do not use the hose to absorb water or any other liquid.
3) Do not immerse the hose in water for cleaning.
4) The hose should be checked regularly and must not be used if damaged.
4. Before using the appliance, pull the cable from the appliance and insert the plug
into the power socket. A yellow mark on the power cable shows the ideal cable
length. Do not pull the cable beyond the red mark.
NOTE:
To rewind the power cable, press the rewind button beneath the body
handle with one hand and guide the cable with the other hand to ensure that
it does not whip causing damage.
5. Turn the power switch to start the appliance and control the dust suction.
6. Adjust the length of the plastic tube by sliding the sliding button to facilitate
cleaning.
Fig.4
5
Publicidad
Tabla de contenido
