Description Of Leds' Operation - A.E.B. OBDII - µFIX Istrucciones De Montaje

DESCRIPTION OF LEDS' OPERATION

In the emulator upper part there are three LEDs, one red, one yellow
and one green LED.
The LED switching on gives the following information:
– At the same time: Communication problems (check the
ON
wiring).
– OK.
OFF
– Connection OK.
ON
– No communication.
OFF
– GASOLINE operation; the led remains always ON.
ON
– OK, GAS operation.
OFF
NOTE: If during the GAS operation the YELLOW LED remains ON,
this means that there are communication problems, therefore it
is necessary to check the wiring or the installed device is not
compatible.
GREEN LED
YELLOW LED
10
RED LED AND YELLOW LED
GREEN LED
YELLOW LED
RED LED