Installation; Installing The Base - Mi RMMNT27NF Manual De Usuario

Installation

Installing the Base

Do not press.
1. Unpack the box, then remove the monitor with
its protective foam together from the box and
place them on a flat stable surface.
3. Remove the top foam layer and the plastic bag
to expose the mounting point on the back of
the monitor.
3
It is recommended to
install the monitor on the
foam to avoid dropping or
scratching it.
2. Install the stand onto the base and fasten it with
Mounting Point
4. Install the stand onto the mounting point until it
the thumb screw from the bottom of the base.
clicks into place. Try to shake the stand to make
sure it is securely installed.
Caution: To reduce the risk of the monitor from
accidentally falling down, please make sure the
stand is firmly installed in place.
Note: Press the clip to remove the stand.
Clip