Back Panel Information - LG 60PJ1 Serie El Manual Del Propietario

BACK PANEl INFORMATION

■ Image shown may differ from your set.
DVI OUT
3
POWER CORD SOCKET
1
This set operates on an AC power. The volt-
age is indicated on the Specifications page.
Never attempt to operate the set on DC
power.
CONTROl (TX, RX)
2
Connector to compensate the luminance dif-
ference.
Connect using LAN Cable inside the
Accessory box.
Connect LAN Cable to TX, and connect to
RX connector of other sets.
RS-232C INPUT(CONTROl&SERVICE)
3
PORT OUT
For control the another set, connect a
RS-232C Cable from RS-232C out port to
another set's RS-232C input port.
IN
Connect to the RS-232C port on a PC.
DVI OUT, IN
4
DVI (VIDEO) signal to DVI port with DVI
cable.
2 1
CONTROL
TX RX
AC-IN
SPEAKER
DVI OUT DVI IN USB RGB OUT (8)
(SERVICE ONLY)
RGB IN
HDMI
DVI IN USB
RGB OUT
(SERVICE ONLY)
RGB IN
HDMI/ DVI
4 5 6 7 8
USB Input (For service)
5
Used for software updates.
HDMI/DVI
Connect an HDMI/DVI signal to HDMI/DVI.
RGB OUTPUT
6
You can watch the RGB signal on another
set, connect RGB OUTPUT to another set's
PC input port.
RGB INPUT
Connect the set output connector from a PC
to the appropriate input port.
AUDIO (RGB/DVI)
7
1/8" headphone jack for analog PC audio
input
REMOTE CONTROl IN
For a wired IR Receiver.
COMPONENT INPUT
8
Connect a component video/audio device to
these jacks.
Speaker Ports
9
Connect to optional external speaker(s).
SPEAKER
(8)
9
7